Warranty pages are written by lawyers and read by nobody until something goes wrong. We would rather you read ours now, in plain English, with the reason behind every line. No surprises later is the whole point.
The short answer: new SP Performance brake rotors are covered against defects in materials and workmanship under normal street use for 12 months or 12,000 miles, whichever comes first, for the original purchaser. Installation errors, track use, normal wear, corrosion from salt or harsh cleaners, and machining after sale are not covered.
What Does the SP Performance Rotor Warranty Cover?
New SP Performance brake rotors are warranted to be free from defects in materials and workmanship under normal street use for 12 months or 12,000 miles (19,300 km), whichever occurs first, from the date of retail purchase by the original end user. Any defective product is replaced without charge during the warranty period.
Three phrases in that sentence do most of the work. Defects in materials and workmanship means a problem with how the rotor was made, not how it was installed or used. Normal street use means public roads, not a race track. Original end user means the person who bought it at retail, so keep your receipt, because coverage starts on the purchase date.
What Is Not Covered, and Why?
Every exclusion below comes straight from our warranty page. Here is what each one means and why it is there.
Improper Installation
This covers failure to torque lugs in a star pattern to OEM spec, not cleaning hubs, not measuring runout, and failing to verify minimum thickness. These steps are excluded because skipping them causes the exact problems people blame on rotors, like pulsation. Our brake rotor installation checklist walks through all four.
Improper Bedding or Incompatible Pads
Bedding builds an even layer of pad material on the rotor face. Skip it, or pair the rotor with an incompatible pad compound, and the result is uneven deposits the rotor did not cause. Read how to bed in brake pads and rotors for the reason behind the step.
Track, Race, Off-Road, and Competition Use
The warranty is written for normal street use. Track and competition braking loads a rotor far beyond street driving, and repeated hard braking is what drives heat cracking in drilled discs. Towing above your vehicle's limits is excluded for the same reason.
Pulsation From Pad Transfer, Runout, Calipers, or Lug Torque
These are the common causes of pulsation, and none of them is a rotor defect. Warping or pulsation caused by pad material transfer, hub runout, caliper issues, or wheel lug torque error is not covered. We explain each one in what brake pedal pulsation really means.
Normal Wear
Reaching minimum thickness, heat checking, cosmetic surface rust on non-coated areas, and noise or squeal all count as normal wear. Rotors wear with every stop. These are signs of a rotor doing its job, not signs of a defect.
Corrosion From Salt, Chemicals, or Harsh Cleaning
The zinc coating resists corrosion. It does not make a rotor immune to road salt or chemicals, and acidic or caustic cleaners and abrasive tools can damage it. Corrosion from any of these is not covered. Our zinc finish guide covers safe care.
Impact, Misuse, and Modifications
Cracks that start from external impact or misuse, such as curb strikes, are not covered. Neither are modifications or machining after sale, including turning, slot re-cutting, drilling, or resurfacing outside spec. Once a rotor is machined, it is no longer the part we built.
Unauthorized Sellers and Altered Labels
Products bought from unauthorized sellers, counterfeit goods, and products with altered or removed serials or labels are not covered. We can only stand behind parts we can verify as ours.
Labor and Other Costs
Labor, shipping, downtime, rental, and incidental or indirect costs are not covered. Painting and installation costs are not covered either. The warranty replaces the rotor itself.
Warranty Coverage at a Glance
| Situation | Covered | Why |
|---|---|---|
| Defect in materials or workmanship | Yes | This is what the warranty is for |
| Pulsation from lug torque error | No | Installation, not a defect |
| Track day use | No | Normal street use only |
| Heat checking | No | Normal wear |
| Crack from a curb strike | No | Impact damage |
| Resurfaced rotor | No | Machining after sale |
Commercial and Fleet Use
Commercial or fleet use is not covered unless SP Performance approves it in writing. Approved commercial or fleet use is covered for 6 months or 6,000 miles, defects only. If your rotors are going on work vehicles, contact us before you order so the terms are clear from day one.
How Do I File a Warranty Claim?
Email customerservice@sp-performance.com with your order information, photos, and measurements. Then wait for your RMA number, which stands for return merchandise authorization. You must have an RMA number before sending anything back. Once we receive and inspect the product, eligible claims get a replacement. If the exact model is unavailable, we may offer a functional equivalent replacement or store credit.
Report a suspected defect within 72 hours. Install day measurements, like runout readings and rotor thickness, are the most useful things you can send. They show the install was done right and point straight at the real cause.
Warranty Claims vs. Returns
A warranty claim is for a defect. A return is for a part you no longer want. Returns are accepted within 30 days of purchase, and a 20% restocking fee applies to accepted returns. Installed, used, or modified brake components are generally not eligible for return. Refunds are issued 7 to 10 business days after we inspect the returned part. Read the full refund policy before you start.
How to Keep Your Coverage
Install the rotors correctly, or have a qualified automotive professional do it, which we strongly recommend. Clean the hubs, measure runout, verify minimum thickness, torque in a star pattern to spec, use a compatible pad, and bed the set in. Then leave the rotor alone: no machining, no painting, no modifications.
Write down your measurements and keep your receipt. That is the whole system. This warranty gives you specific rights, and you may also have other rights, which vary from state to state. Shopping for a set? Our Double Drilled & Slotted rotors carry the same warranty as every SP Performance rotor.
Rotor Warranty FAQ
How long is the SP Performance rotor warranty?
The SP Performance rotor warranty runs 12 months or 12,000 miles (19,300 km), whichever occurs first, from the date of retail purchase by the original end user, under normal street use.
Does the warranty transfer if I sell my car?
No. SP Performance warrants its rotors to the original purchaser only, so coverage does not move to a new owner of the vehicle.
Is track use covered by the warranty?
No. Track, race, off-road, and competition use are not covered, and neither is towing above vehicle limits. The warranty is written for normal street use.
Does the warranty pay for labor?
No. Labor, shipping, downtime, rental, and incidental or indirect costs are not covered. The warranty replaces the defective rotor without charge during the warranty period.
What do I need to file a warranty claim?
Send your order information, photos, and measurements to customerservice@sp-performance.com. You will receive an RMA number, and you need it before sending anything back.
The Bottom Line
Our warranty covers what we control: how the rotor is made. It excludes what we do not control: installation, use, and normal wear. Install it right, keep your receipt and your measurements, and you are covered. Start with the installation checklist.